EasyManua.ls Logo

DIVERSITECH ASURITY PROCP-22S - User Manual

DIVERSITECH ASURITY PROCP-22S
24 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Installation Instructions
Standard Applications
Models: PROCP-22S, PROCP-22S-230,
PROCP-22ST, PROCP-22ST-230
Condensate
Pump Pro

Table of Contents

Questions and Answers

  • M
    Michael ColemanAug 19, 2025
    Why won't my DIVERSITECH ASURITY PROCP-22S start when full?
    • L
      leerachelAug 19, 2025
      If your DIVERSITECH Water Pump doesn't start when full of condensate, it could be due to a couple of reasons. First, check if power is being supplied to the pump. Remove the top of the pump from the tank and manually move the float up. The pump motor should activate, the fan should spin visibly, and you should hear it running. Another possibility is that the pump impeller isn't turning. Inspect the impeller housing for any blockages. If the problem continues, the motor might be stuck, and you should return the pump to the place of purchase if it's still under warranty.
  • J
    Julie YoungNov 2, 2025
    What to do if my DIVERSITECH ASURITY PROCP-22S is overflowing?
    • B
      brittanyholdenNov 3, 2025
      If condensate is overflowing from your DIVERSITECH Water Pump, there are several potential causes. First, power may not be supplied to the pump. To check, take the top of the pump off the tank and manually move the float up. The pump motor should turn on, the fan should be visibly spinning, and you should hear it. The overflow could also be due to the inlet flow exceeding the outlet flow. Ensure the pump's safety switch (alarm circuit) is connected to the appliance, as this will shut off the appliance in an overflow condition. Confirm the pump is level, as an unlevel pump may not activate. Place the unit on a flat and level surface. Check the outlet tubing for kinks or blockages, and clear any slime or debris. Clean the inlet and outlet piping. Finally, the impeller might not be turning. C...

Summary

Introduction and Safety Information

Safety Information

Provides critical safety warnings including danger, fire/explosion hazards, California Proposition 65, flood risks, and general warnings.

Product Specifications and Features

Temperature Rating

Details the continuous duty and maximum inlet temperature limits for the condensate pump.

General Information

Explains the pump's function: automatically removing condensate water from appliances like AC units and dehumidifiers.

Features

Highlights key components such as the overflow safety switch, inlet hole, and check valve.

Package Contents

Lists the items included in the product package, such as the pump and inlet hole covers.

Specifications

Provides technical details for different models, including voltage, current, head height, and flow rate.

Installation Guide

Mounting Options

Describes how to place the pump on the floor or attach it to a wall using mounting tabs.

Reverse Top Option

Explains how to rotate the pump top 180 degrees for better access to outlet or power connections.

Level Unit

Instructs to ensure the condensate pump is mounted on a level surface for proper operation.

Outlet Connections

Details the process of attaching the plastic tubing to the check valve and securing it with a hose clamp.

Inlet Connections

Guides on installing condensate drain tubing into one of the four inlet holes.

Inlet Covers

Instructions for inserting inlet covers into the remaining condensate pump inlet holes.

Safety Switch Connection

Explains how to connect the overflow safety switch terminals as per the wiring diagram.

Electrical Connection

Provides instructions and warnings for connecting the pump to a properly grounded electrical outlet.

Operation and Maintenance

Testing Float Operation

Manual test procedure to verify the pump motor and fan activate and water is pumped out.

Testing Overflow Switch

Procedure to test the overflow safety switch by manually raising the float.

Maintenance and Disassembly

Guidelines for periodic inspection, cleaning the tank with soap and water, and check valve maintenance.

Troubleshooting and Warranty

Troubleshooting Common Issues

Addresses problems like unit not starting, condensate overflowing, and pump not shutting off.

Warranty Information

Outlines the 36-month limited warranty, terms, and conditions for defects in workmanship and materials.

DIVERSITECH ASURITY PROCP-22S Specifications

General IconGeneral
BrandDIVERSITECH
ModelASURITY PROCP-22S
CategoryWater Pump
LanguageEnglish

Related product manuals