DIVERSITECH ASURITY PROCP-22S - Operation and Maintenance; Testing Float Operation

www.diversitech.com | 800.995.2222 PAGE 9
INSTALLATION (continued)
Plug Note: Removal of the wall side electrical plug may be
permissible if:
1. The power leads, after plug removal, are connected directly
within an approved junction or conduit box, as judged by the local
authority having jurisdiction.
  2.Themodicationisperformedbyaqualiedtechnician.
  3.Themodicationmeetscodecompliantrequirementsaccording 
to the local authority.
This modication does not void the factory warranty. Final
installations should always be inspected and approved by the local
authority according to the requirements set forth by
the same local authority.
OPERATION
1. TESTING FLOAT
Manually ll the tank with water. The pump motor will turn on and the
fan will be audible. Ensure that the fan blades are moving by looking
through the top of the pump. Ensure that water is pumping out of the
outlet tube.
1
7
1
1