Dixie Narco 90 Series - Cam Installation and Removal; To Install a Vending Cam; To Install an Adjustable Cam; To Remove an Adjustable Cam

Set-up subject to change without notice. For packages not listed contact Dixie-Narco Factory
Service at (800) 688-9090. Page 24 of 72
ADJUSTMENTS – CAMS / REAR SPACERS
CAMS FOR VEND MOTORS
1. Vending Cam For:
a. DNCB E-Models double or triple
depth wide column.
b. Color of Cam is Grey.
c. Part# 801,809,80x.x1
2. Adjustable Cam For:
a. DNCB E-Models double or triple
depth wide column.
b. Color of Cam is Red.
c. Part# 801,809,79x.x1
3. Vending Cam For:
a. DNCB E-Models single, double,
or triple depth narrow column.
b. Color of Cam is Brown.
c. Part # 801,806,18x.x1
4. Adjustable Cam For:
a. DNCB E-Models single, double, or
triple depth narrow column.
b. Color of Cam is Brown.
c. Part # 801,806,61x.x1
5. Adjustable Cam For:
a. DNCB E-Models single or
double depth wide column.
b. Color of Cam is Gold.
c. Part #801,806,40x.x1
6. Vending Cam For:
a. DNCB E-Models single or double
depth wide column.
b. Color of Cam is Blue.
c. Part #801,806,39x.x1