Dixie Narco DNCB 600E - Page 64

Set-up subject to change without notice. For packages not listed contact Dixie-Narco Factory Service at (800) 688-9090. Page 62 of 72
COIN MECH TROUBLESHOOTING CHART
L+/MC 5000 (Micro Mech) Interface Problems
Make sure coin mech is
plugged in.
A
No
A Not accepting money.
B Not displaying credit
Enter diagnostics.
B2
Coin mech recognized
as “nn” (micro mech).
Check for proper coin
mech.
Advance to “cn” for
coin mech test.
Insert coins in mech.
Did mech accept coins?
Check F3 fuse.
O.K.?
1
Replace
fuse.
Check coin mech
harness for continuity.?
Did display register
credit?
Enter service mode and
advance to “S-P”.
Harness
check out.
O.K.?
Replace
harness.
Return to
1
(above)
Replace
harness.
Harness check
out O.K.?
Return to
1
(above)
Check coin mech
extension harness.
Check coin mech with known good mech. Does mech function properly/
Call Dixie-Narco
Factory Service.
Return to
2
(above)
3
Are all vend
prices set to 0?
Replace coin mech.
Change
prices.
3
No No
Yes
Yes
No
Yes
Yes
No
No
No
Yes
Yes
Yes
No
Yes