42
CARE AND MAINTENANCE
ELECTRICAL SYSTEMS:
Keep all connections clean and tight.
CLEANING THE MOWER:
Wash mower periodically. Clean above and below deck.
High pressure washing and alkaline based soaps can cause
damage to bearings and other parts of the mower. After
washing your mower, start the engine and engage the
mower deck for a few minutes to disperse any water that
may have accumulated in bearings, pulleys or fans.
Note: Allow mower to cool before washing. If bearings
are hot, they will draw moisture inside as they
dry and cause corrosion.
SERIAL NUMBERS:
The serial number is located on frame at rear of engine.
WARRANTY:
Refer to warranty information on Page 13, or see the
Warranty Registration Form in your owner’s packet.
PARTS/SERVICE:
See your Dixon dealer for replacement parts, warranty or
service.
PLEASE HELP PROTECT THE ENVIRONMENT BY AVOIDING ALL
CHEMCIALS WHICH MAY DAMAGE OR CAUSE HARM TO
PLANTS AND ANIMALS IN YOUR AREA.
To Next Page
Loading...
