● Only take off in open areas and set an appropriate auto-takeoff height according to the operating environment.
● An operation can be paused by moving the control stick slightly. The aircraft will hover and record the breakpoint. After
which, the aircraft can be controlled manually. To continue the operation, select it again from the Executing tag in list.
The aircraft will return to the breakpoint automatically and resume the operation. Pay attention to aircraft safety when
returning to a breakpoint.
●In Route Operation mode, the aircraft is able to circumvent obstacles, which is disabled by default and can be enabled in
the app. If the function is enabled and the aircraft detects obstacles, the aircraft will slow down and circumvent the obstacles
and return to the original flight path.
● Users can set the action the aircraft will perform after the operation is completed in the app.
More Operation Modes and Functions
Refer to the Agras T30 User Manual for more information about the A-B Route, Manual, and Manual Plus Operation
modes and on how to use functions such as Smart Supply Reminder, Operation Resumption, System Data Protection,
and Empty Tank.
6. Maintenance
Clean all parts of the aircraft and remote controller at the end of each day of spraying:
1. Fill the spray tank with clean water or soapy water and spray the water through the nozzles until the tank is empty.
Repeat the step twice more.
2. Remove the spray tank strainer, nozzle strainers, and nozzles to clean them and clear any blockage. Afterwards,
immerse them in clean water for 12 hours.
3. Use a water-filled washer with a max water pressure of XX MPa to clean the aircraft body and wipe it with a soft brush
or wet cloth before cleaning water residue with a dry cloth.
4. If there is dust or pesticide liquid on the motors and propellers, wipe them with a wet cloth before cleaning water
residue with a dry cloth.
5. Wipe the surface and screen of the remote controller with a clean wet cloth that has been wrung out with water.
Refer to the disclaimer and safety guidelines for more information on product maintenance.
Specifications
2858×2685×790 mm (arms and propellers unfolded)
2030×1866×790 mm (arms unfolded and propellers folded)
To Next Page
Loading...
