Make sure to read the disclaimer and safety guidelines.
Using the T30
1. Preparing the Intelligent Flight Battery
Only use official DJI flight batteries (model: BAX501-29000mAh-51.8V). Check the battery level
before flying and charge according to the corresponding manual document.
2. Preparing the Aircraft
Unfold the M2 and M6 arms, and fasten the two arm locks. Avoid pinching fingers. Unfold the M3 and M5 arms followed
by M1 and M4 and fasten the four arm locks. Avoid pinching fingers.
Unfold the propeller blades. Insert the Intelligent Flight Battery into the aircraft until
you hear a click.
●Make sure that the battery is firmly inserted into the aircraft. Only insert or remove the battery when the aircraft is
powered off.
●To remove the battery, press and hold the clamp and lift the battery up.
●When folding the arms, make sure to fold the M3 and M5 arms first, and then the M2 and M6 arms. Otherwise, the arms
may be damaged. Lift and lower the M1 and M4 arms gently to reduce wear and tear.
3. Preparing the Remote Controller
Charging the Batteries
Charge the external Intelligent Battery using the charging hub and AC power adapter. Charge the internal battery of the
To Next Page
Loading...
