©
2017 DJI All Rights Reserved.
49
INSPIRE 2
User Manual
3. Power on the aircraft.
4. Information about the CINESSD will be available in the DJI GO™ 4 app.
Exporting Files
1. Power off the aircraft. Remove the batteries and then the CINESSD.
2. Insert the CINESSD into the DJI CINESSD Station, then connect the station to a computer via a
USB cable.
1
2
USB Port
Using CINESSD
Using an Inspire 2 as an example.
Storing Files
1. Power off the aircraft.
2. Insert the CINESSD into the aircraft. If the CINESSD is not detected, check if it is inserted correctly.
To Next Page
Loading...
