dji LIGHTBRIDGE - Page 18

©2014 DJI. All Rights Reserved. 18
Scenario 2 - Dual Video Source with Single Remote Control
Use single remote control to control gimbal and aircraft independently. Map the gimbal and aircraft control
channels to the remote control through DJI LIGHTBRIDGE Assistant. In single video source mode, aircraft
operator receives the FPV camera video feed from the master ground station, while the gimbal operator
receives DJI HD gimbal video feed from the slave ground station.
Air system connection：
1. Connect Gimbal Port on air system to G7 port on DJI HD gimbal with supplied Gimbal cable (DJI HD
gimbal).
FPV Camera
Gimbal Camera
FPV Camera
Video