EasyManua.ls Logo

dji MATRICE 200

dji MATRICE 200
14 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Remote Controller
The remote controller features DJI’s LIGHTBRIDGE
TM
technology for a maximum transmission distance of up to 4.3 mi (7km).*
While ying the aircraft, you have a live HD view directly within the DJI GO
TM
4 app on your paired device for a precise and
responsive ying experience. Dual frequency support makes the HD video downlink more stable. In Dual Remote Controllers
Mode, each of the two remote controllers controls the aircraft and camera separately. Users can even operate these
mechanisms up to 328 feet (100 m) apart.*
The maximum run-time of the remote controller’s LiPo battery is approx. four hours.*
* The remote controller can reach its maximum transmission distance (FCC) in a wide open area with no Electro-Magnetic interference, and at an
altitude of about 400 feet (120 meters).
For more information about the Dual Remote Controllers Mode, please refer to the user manual.
The maximum run-time is tested without supplying power to a smart device.
To comply with local regulations, the operation frequency of 5.8GHz is not available in some countries.
1. Power Button
2. Return-to-Home (RTH) Button
3. Control Sticks
4. Status LED
5. Battery Level LEDs
6. Power Port
7. Mobile Device Holder
8. Antennas
9. Handle Bar
10. Control Dial (Gimbal/FPV)
11. Camera Settings Dial
12. Record Button
13. Flight Mode Switch
14. Shutter Button
15. Pause Button
16. Micro USB Port
17. CAN Bus (Extended Port)
18. HDMI A Port (for Video Output)
19. USB Port (for Mobile Device Connection)
20. C1 Button
21. C2 Button
3
8
9
7
4
5
1
2
6
16
17
18 19
10
13
12
11
1514
21
20
Folded
Stick mode is set to Mode 2 by default (left hand throttle). The left stick controls the aircraft’s elevation and heading. The right stick
controls the aircraft’s forward, backward, and lateral movements. The gimbal dial controls tilting and panning of the camera. To adjust
the FPV camera, press and hold the C2 Button and rotate the control dial.
U
P
D
o
w
n
F
o
r
w
a
r
d
B
a
c
k
w
a
r
d
T
u
r
n
R
i
g
h
t
T
u
r
n
L
e
f
t
R
i
g
h
t
L
e
f
t
Left Stick Right Stick Camera and Gimbal FPV Camera
For more information about how to connect and use the remote controller, please refer to the user manual.
You can change the stick mode in the DJI GO 4 app.

Other manuals for dji MATRICE 200

Related product manuals