Mavic 2 Enterprise User Manual
30
©
2018 DJI All Rights Reserved.
DJI AirSense
Manned aircraft with an ADS-B transceiver will actively broadcast ight information including location,
flight path, speed, and altitude. DJI AirSense receives this by ADS-B transceivers via an on-board
receiver or internet connection. UAVs installed DJI AirSense can obtain the position, orientation and
velocity information from the manned airplane built-in ADS-B transmitter (1090 ES and UAT standard
supported), calculate the collision risk level real time and send the warning to user. The system will
analyze the potential risk of collision by comparing the location of a manned aircraft, sending timely
warnings to pilots via the DJI Pilot app.
DJI AirSense provides users with information about nearby manned aircraft to ensure ight safety. The
system doesn’t actively control the drone to avoid incoming aircraft. Always y your aircraft within a
visual line of sight and be cautious at all times. Lower your altitude when you receive warnings. Please
be aware that DJI AirSense has the following limitations:
1. It can only receive messages sent by manned aircraft installed with an ADS-B out device and in
accordance with 1090ES (RTCA DO-260) or UAT (RTCA Do-282) standards. DJI devices will not
receive related broadcast messages or send out warnings for manned aircraft without ADS-B outs
or with malfunctioning ADS-B outs.
2. If there is an obstacle or steel structure between civil and DJI aircraft, the system won’t be able
to receive ADS-B messages sent by manned aircraft or send out warnings. Keenly observe your
surroundings and y with caution.
3. Warnings may be sent with delay when the DJI AirSense is interfered by the surrounding. Keenly
observe your surroundings and y with caution.
4. Warnings are not sent when a DJI aircraft is unable to determine its location.
5. It cannot receive ADS-B messages sent by manned aircraft or send out warnings when disabled or
miscongured.
On the precondition that connection between a DJI aircraft and the pilot remote controller is stable,
when the system conrms the possibility of a collision, it will send a series of warnings based on the
distance between drone and manned aircraft. We recommended that the operator descend altitude
immediately after the rst warning to avoid a collision, choosing another ight path where necessary.
Warning Escalation:
The first (or "lowest") level warning occurs when the manned aircraft is detected. All detected
aircraft will be displayed in the app (up to 10 aircraft at a time). Please pay attention to ensure
flight safety.
The second (or “middle”) level warning occurs two kilometers away from the manned aircraft.
Please pay attention to avoid any hazards.
The third (or “highest”) level warning occurs one kilometer away from the manned aircraft. Please
avoid the manned aircraft immediately.
Red: The third level warning
Blue: The rst level warning Yellow: The second level warning
To Next Page
Loading...
Need help?
General
Weight and Dimensions
