Mavic 2 Enterprise User Manual
©
2018 DJI All Rights Reserved.
31
Modular Accessories
Mavic 2 Enterprise features an extended port, which allows users to mount additional DJI modular
accessories onto the aircraft. Compatible DJI accessories consist of the following:
M2E Beacon: Enables aircraft identication during ight at night or in low light areas.
M2E Spotlight: Used for long-range illumination and searches in low light conditions, assisting the
camera to shoot at night.
M2E Speaker: Used for long-range, real-time broadcasting or audio playback.
Usage
The following example illustrates how to install and use the modular accessories. Please note, for the
purpose of this illustration we will use the M2E Beacon.
1. Remove the extended port cover on top of the aircraft. Make sure it is stored in a safe place for future
use.
2. Mount the Beacon onto the extended slot of the aircraft.
3. Tighten the knobs on both sides to ensure that the Beacon is rmly mounted onto the aircraft.
M2E Beacon M2E Spotlight M2E Speaker
1
2
4. Power on the aircraft, and then launch the DJI Pilot app to use the Beacon.
The Auxiliary Bottom Light can be used as a beacon. You can simply enter Visual Navigation
Settings and select Bottom Auxiliary Light as Night Light in DJI Pilot.
Make sure that the accessories are correctly and securely mounted on the aircraft before using
the accessories. This is to prevent the accessory from falling off during flight.
DO NOT point the Spotlight or the Beacon directly at the human eye.
DO NOT use the Speaker near people or in an urban area where noise-sensitive structures are
concentrated as the loudness could cause injuries or danger.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
