Left stick up (slowly) to take off
Left stick down (slowly) until you touch the ground
Hold a few seconds to stop the motors
The motors can only be stopped mid-flight when the flight controller detects a critical error.
Remote Controller Operation
The default flight control is known as Mode 2. The left stick controls the aircraft’s altitude and heading, while the right stick controls its forward, backward, left, and right
movements. The gimbal dial controls the camera’s tilt.
Press the Flight Pause button for emergency braking during flight.
In DJI GO 4
Watch the tutorials in DJI GO 4 or at the official DJI website to learn more.
Always set an appropriate RTH altitude before takeoff. When the aircraft is returning to the Home Point, you should guide it with the control sticks.
Fly Safe
To Next Page
Loading...
