EasyManuals Logo

dji MAVIC 3E User Manual

dji MAVIC 3E
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
DJI Mavic 3E/3T User Manual
16
©
2022 DJI All Rights Reserved.
d. Flying over moving surfaces or objects.
e. Flying in an area with frequent and drastic lighting changes.
f. Flying over extremely dark (< 10 lux) or bright (> 40,000 lux) surfaces.
g. Flying over surfaces that strongly reflect or absorb infrared waves (e.g., mirrors).
h. Flying over surfaces without clear patterns or texture.
i. Flying over surfaces with repeating identical patterns or textures (e.g., tiles with the
same design).
j. Flying over obstacles with small surface areas (e.g., tree branches).
Keep the sensors clean at all times. DO NOT scratch or tamper with the sensors. DO
NOT use the aircraft in dusty or humid environments.
DO NOT fly when it is rainy, smoggy, or the visibility is lower than 100 m.
Check the following each time before takeoff:
a. Make sure there are no stickers or any other obstructions over the glass of the Vision
Systems and Infrared Sensing system.
b. Use soft cloth if there is any dirt, dust, or water on the glass of the Vision Systems
and Infrared Sensing system. DO NOT use any cleaning product that contains
alcohol.
c. Contact DJI Support if there is any damage to the glass of the Infrared Sensing and
Vision Systems.
DO NOT obstruct the Infrared Sensing System.
Return to Home
Return to Home (RTH) brings the aircraft back to the last recorded Home Point when the
positioning system is functioning normally. There are three types of RTH: Smart RTH, Low
Battery RTH, and Failsafe RTH. The aircraft automatically flies back to the Home Point
and lands when Smart RTH is initiated, the aircraft enters Low Battery RTH, or the signal
between the remote controller and the aircraft is lost during flight.
GNSS
Description
Home
Point
1
0
The first location where the aircraft receives a strong to moderately
strong GNSS signal (indicated by a white icon) will be recorded
as the default Home Point. The Home Point can be updated
before takeoff as long as the aircraft receives another strong to
moderately strong GNSS signal. If the signal is weak, the Home
Point will not be updated. DJI Pilot 2 will give a voice prompt when
the Home Point is set.

Other manuals for dji MAVIC 3E

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the dji MAVIC 3E and is the answer not in the manual?

dji MAVIC 3E Specifications

General IconGeneral
Effective Pixels20 MP
Max Flight Time46 minutes
Max Transmission Range15 km
Max Wind Resistance12 m/s
Aircraft TypeQuadcopter
Max Takeoff Weight920 g
Diagonal Distance380.1 mm
Max Ascent Speed8 m/s
Max Descent Speed6 m/s
Max Horizontal Speed21 m/s
Max Flight Distance32 km
Max Tilt Angle35°
GNSSGPS+Galileo+BeiDou
Internal Storage8 GB
Max Speed21 m/s
Gimbal3-axis (tilt, roll, pan)
Battery Capacity5000 mAh
Camera Sensor4/3 CMOS
Obstacle SensingOmnidirectional
Dimensions (Folded without propellers)221×96.3×90.3 mm
Dimensions (Unfolded without propellers)347.5×283×107.7 mm
Operating Temperature-10° to 40° C
Hovering Accuracy RangeVertical: ±0.1 m (with vision positioning); ±0.5 m (with GNSS positioning), Horizontal: ±0.3 m (with vision positioning)
Storage Temperature-20° to 45° C
Camera - ZoomYes, Hybrid Zoom
Charging Time96 minutes

Related product manuals