©
2018 DJI All Rights Reserved.
17
Updating the Firmware
Use the DJI GO App to update the Osmo Mobile 2 firmware. It takes approximately 10
minutes to complete an update.
How to Update
Ensure that the battery has at least 30% charge before starting an update. Connect the
Osmo Mobile 2 to your mobile device and then launch the DJI GO app. You will be reminded
if a new rmware update is available. To start updating, connect your mobile device to the
Internet and follow the on-screen instructions.
Do not exit the DJI GO app during the update process. Pay attention to on-screen prompts.
The System Status Indicator will become solid green once the firmware update has
completed successfully. Restart the Osmo Mobile 2 and DJI GO app after updating. If an
update is unsuccessful, retry.
To Next Page
Loading...
