EasyManua.ls Logo

dji Phantom 2 Vision + - 1.1 Calibration Procedures; 2 StartingStopping the Motors; 3.1 Take offLanding Procedures

dji Phantom 2 Vision +
30 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
©2014 DJI Innovations. All Rights Reserved.55 |
2
Compared with the control of mobile device movement in Accelerometer Sensor Mode, the
control of remote controller is prior.
1) Camera Pitch Angle Control
Pitch the mobile device forward to pitch down the camera. Pitch the mobile device inward to pitch up the
camera.
Gimbal pitch control (Accelerometer Sensor Mode)
Gimbal pitch movement
2) Aircraft Yaw AxialControl
If you wish to use the mobile device to control the Yaw movement of the aircraft, you need to enable this
function in the setting page of the DJI VISION App. After this function is enabled, Lean the mobile device
left to rotate le f t
and right to rotate right .
Aircraft yaw Control (Accelerometer Sensor Mode)
Aircraft yaw Movement
Yaw axial control can be enabled and disabled from the setting page of the DJI VISION App.

Other manuals for dji Phantom 2 Vision +

Related product manuals