Product Profile
Phantom 4 Pro / Pro+ Use Manua
10
©
2017 DJI All Rights Reserved
Phantom 4 Pro (Mode : GL300F)
[1
Antennas
Relays aircraft control and video signal.
[2
Mobile Device Holder
Securely mounts your mobile device to the
remote controller.
[
1
]
[
2
]
[
3
]
[
4
]
[
5
]
[
7
]
[
8
]
[
6
]
[3
Control Stick
Controls the orientation and movement of the
aircraft.
[4
Return Home (RTH) Button
Press and hold the button to initiate Return to
Home (RTH).
[5
Battery Level LEDs
Displays the battery level of the remote
controller.
[6
Status LED
Displays the remote controller's system status.
[7
Power Button
Used to tur the remote controller on and off.
[8
RTH LED
Circ lar LED around the RTH button displays
RTH status.
[9
Camera Settings Dial
Turn the dial to adjust camera settings.
(Only functions when the remote controller is
connected to a mobile device ru ning the DJI
GO 4 app.)
[10
ntelligent Flight Pause Button
Press once to allow the aircraft to exit from
TapFly, ActiveTrack and other intelligent ight
modes.
[11
Shutter B tton
Two-stage button, press to take a photo.
[12
Flight Mode Switch
Switch between P-mode, S-mode, and
A-mode.
[13
Video Recording Button
Press to start recording video. Press again to
stop recording.
[14
Gimbal Dial
Use this dial to control the tilt of the gimbal.
[15
Micro USB Port
Reserved port.
[16
USB Port
Connection to mobile device for DJI GO 4 app.
[10]
[11]
[15] [16]
[9]
[12]
[13]
[14]