Aircraft
Phantom 4 Pro / Pro+ Use Manua
©
2017 DJI All Rights Reserved
31
The Intelligent Flight Battery must be fully charged before using it for the rst ime.
Be aware that the output power of the supplied Phantom 4 Pro / Pro+ charger is 100W.
DJI Intelligent Flight Battery
The DJI Intelligent Flight Battery has a capacity of 5870 mAh, a voltage of 15 2 V, and a smart charge/
discharge functionality. It should only be charged using an appropriate DJI approved charger.
Intelligent Flight Battery Charger
DJI Inte gent F ght Battery Funct ons
1. Battery Level Display: The LED indicators display the current battery level.
2. Auto-Discharging Function: To prevent swelling the attery automatically discharges to below 65% of
total power when it is idle for more than ten days. I takes around two days to discharge the battery to
65%. It is normal to feel moderate heat being emitted from the battery during the discharge process.
Discharge thresholds can be set in the DJI GO 4 app.
3. Balanced Charging: Automatically balances the voltage of each battery cell when charging.
4. Overcharge Protection: Charging aut matically stops when the battery is fully charged.
5. Temperature Detection: The ba tery will only charge when the temperature is between 5°C (41°F) and
40°C (104°F).
6. Over Current Protection: The battery stops charging when a high amperage (more than 8 A) is
detected.
7. Over Discharge Protection: To prevent over-discharge damage, discharging automatically stops when
the battery voltage reaches 12 V.
8. Short Ci uit Protection: Automatically cuts the power supply when a short circuit is detected.
9. Battery Cell Damage Protection: The DJI GO 4 app displays a warning message when a damaged
battery cell is detected.
10. Sleep Mode: To save power, the battery enter sleep mode after 20 minutes of inactivity.
11 Communication: Information pertaining to the battery’s voltage, capacity, current, etc. is transmitted to
the aircraft’s main controller.
Refer to
Phantom 4 Pro / Pro+ Intelligent Flight Battery Safety Guidelines
before use. Users take
full responsibility for all operations and usage.
To Next Page
Loading...
