2. Prepare the Camera
Attachments, batteries and media
Before using the gimbal it has to be balanced
with the camera. Prepare the camera so that
everything that is needed in and on the camera
is attached or inserted.
The neck strap should be removed. Place the
battery and SD card inside. Put the desired lens
on the camera, the lens hood if required and
take off the lens cap.
This advice seems pedantic but if there are any
changes to the camera (for example: removing a
lens cap or attaching a lens hood), the gimbal
will have to be rebalanced.
Sony A7R III with the Sony FE 24mm F1.4 GM
prime lens. This is a good lens to use.
To Next Page
Loading...
