EasyManua.ls Logo

dji Ronin S2 - Prepare the Camera

dji Ronin S2
52 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. Prepare the camera
Which camera to use?
The DJI Ronin RS 2 can work with many still cameras. The complete list can be found on this
page:
https://www.dji.com/ca/support/compatibility
In this guide, I refer to the Sony mirrorless cameras as these are the still cameras in the EV
depot with the best video recording quality. However, you can use other still cameras if you
wish. Refer to the specific menu settings required for remote control on the DJI
compatibility pages.
Do not use the RS 2 gimbal with any video cameras. It is not for use with the Sony FX6, FS5
or Z90 video cameras in the EV depot or any other video camera with the exception of
Blackmagic “pocket” video cameras.
Although DJI claim that this gimbal can support a 10 Lbs camera (4.5 kg), I remain skeptical.
It is difficult to balance the gimbal with a load of half that weight. The smaller and lighter
the load, the better the gimbal works.

Related product manuals