Controlling Exposure Remotely
In the (Sony a7Rr) camera menu, set the exposure in Movie Mode to
Manual Exposure. (camera menu 2, page 1).
The f stop (aperture) dial on the prime lenses should be turned to “A”
(auto).
The camera should be connected to the gimbal with the USB C cable.
If you can, set your exposure before you start shooting.
Change the dial functions on the gimbal to control aperture, shutter and
ISO.
Swipe up on the touch screen to reach the Dial function menu.
If a change in exposure is required during the shot, choose ISO or aperture
as the dial function to control one of those parameters. Never change the
shutter speed during shooting unless you want a special effect. The shutter
speed should remain at twice the frame rate.
To Next Page
Loading...
