3. Assemble the Gimbal
The battery grip:
The battery grip lock is a bit deceptive and not very
confidence building.
Press the button inside the lock lever and move the
lever to the unlock position to insert the grip, then
move the lever to the locked position to tighten. Move
the lever as far to the locked position as possible.
There is no click when it locks. It is simply a pressure
lock. The grip cannot come loose without the button
inside the lock being pressed.
Screw the mini-tripod legs on to the gimbal handle. Set
up the gimbal on a hard level surface like a table to do
the balancing.
To Next Page
Loading...
