3. Assemble the Gimbal
The lens strap:
There is a lens strap for supporting larger lenses
that must be placed on the camera before the
gimbal is balanced.
Lenses larger than the 24 mm Sony prime will
need the lens strap to help reduce stress on the
lens mount. You must also use the lens strap for
Supersmooth mode.
The lens strap has two parts: a knob that screws
the strap handle into the camera slide plate, and
the strap handle with the strap.
See the next slide for two variations on how to
mount the lens strap.
To Next Page
Loading...
