and select Auto Tune.
Button Features
Power Button: press and hold the power button to turn the Ronin-SC on or off. Tap the power button to enter or exit
sleep mode.
M Button: tap to select a user profile. Press and hold to enter Sport mode.
Joystick: push the joystick up or down to control the movement of the tilt axis, and push it left or right to control the
movement of the pan axis. Go to the Joystick page of the Ronin app to adjust the parameters for the pan, tilt, and roll
axes.
Camera Control Button: after connecting the camera control port and camera, press halfway for autofocus, as you
would the shutter button on a camera. Press to start or stop recording. Press and hold to take a photo. For the most
updated Camera Compatibility List, refer to the Ronin-SC product page on the official DJI website
(http://www.dji.com/ronin-sc).
Trigger: press and hold the trigger to enter Lock mode. Press twice to reenter the gimbal. Press three times to turn
the gimbal 180° so that the camera faces you.
When the camera and Ronin-SC are connected using the camera control cable (USB-C), playback
cannot be used. In that scenario, press the power button to enter sleep mode and then use playback.
Specifications
Weight
Gimbal: Approx. 830 g
Grip: Approx. 258 g
Tripod: Approx. 160 g
Dimensions
Gimbal (folded): 220×200×75 mm
Gimbal (unfolded): 370×165×150 mm
Input Power
Model: RB2-2450 mAh-7.2 V
Type: 18650 Lithium
Capacity: 2450 mash
Energy: 17.64 Wh
Operating Current
Static Current: 0.2 A
Bluetooth Operating Frequency
2.40 GHz -2.4835 GHz
Bluetooth Transmitter
<8 dBm Power
Operating Temperature
-20° to 45° C (-4° to 113° F)
Max. Standby Time
11 hours
For more information, read the User Manual: http://www.dji.com/ronin-sc
This content is subject to change without prior notice.
RONIN is a trademark of DJI OSMO. Copyright © 2019 DJI OSMO All Rights Reserved.
Printed in China.
To Next Page
Loading...
