4. Loosen the knob on the bottom of the camera mounting plate(1) and move it to the side of the axis. Slide the
camera into the plate(2) . Tighten the knob when the camera is in the middle of the plate.
If using accessories such as the phone holder or focus motor, make sure to mount all accessories before
balancing. Refer to the manual documents of the accessories for more information.
Make sure to tighten the screw under the dovetail plate.
Balancing
Balancing is required before shooting. Before balancing, make sure to power on the camera if using a optical zoom
lens and to select the focal length if using a varifocal lens. There are balancing tutorials in the Ronin app, which can
be viewed after activation. Balancing can also be performed without connecting to the Ronin app. In that scenario,
To Next Page
Loading...
