button to check the battery level.
F. Powering On/Off and Sleep Mode
Press and hold the power button to turn Ronin-SC on or off Tap the power button to enter sleep mode. Tap again to
exit sleep mode.
Ronin-SC can be operated during charging.
Activating Ronin-SC
Ronin-SC needs to be activated through the Ronin app before using for the first time.
1. Press and hold the power button to power on the gimbal.
2. Enable Bluetooth on your mobile device and launch the Ronin app. Note that a DJI account is required to
launch the Ronin app. Once detected in the list of Bluetooth devices, select Ronin-SC and input the default
Bluetooth password: 12345678.
3. Make sure you are connected to the internet and follow the on-screen instructions to activate Ronin-SC.
Mounting the Camera
Make sure to prepare the camera before mounting it to Ronin SC. Remove the lens cap and make sure the battery
and memory card are inserted in the camera.
To Next Page
Loading...
