To Next Page

To Previous Page

DJI Smart Controller User Manual

位置T

位置S

位置P

Position Flight Mode

T T-mode (Tripod)

P P-mode (Positioning)

S S-mode (Sport)

T-mode (Tripod):

The aircraft utilizes GPS and vision systems to locate itself, stabilize, and navigate

between obstacles. In this mode, the maximum ight speed is limited to 2.2 mph (3.6 kph). The

responsiveness to stick movements is also reduced for smoother, more controlled movement.

P-mode (Positioning):

P-mode works best when the GPS signal is strong. The aircraft utilizes GPS,

Vision Systems, and an Infrared Sensing System to stabilize, avoid obstacles, and track moving

subjects. Advanced features such as TapFly and ActiveTrack are available in this mode.

S-mode (Sport):

The handling gain values of the aircraft are adjusted to enhance aircraft

maneuverability. Note that Vision Systems are disabled in this mode.

Regardless of the position the switch is in on the remote controller, the aircraft begins in P-mode

by default. To switch ight modes, rst go to camera view in DJI GO 4, tap and enable “Multiple

Flight Modes”. After enabling multiple ight modes, toggle the switch to P and then to S or T to

switch ight modes.

Refer to the ight modes section in the aircraft’s user manual for more information about

ight mode features for different aircraft types.

RTH Button

Press and hold the RTH button to start Return to Home (RTH) and the aircraft will return to the last

recorded Home Point. Press the button again to cancel RTH and regain control of the aircraft. Refer

to the Return to Home section in the aircraft’s user manual for more information about RTH.

Position T

Position P

Position S

Questions and Answers:

Need help?

Do you have a question about the dji Smart Controller and is the answer not in the manual?

dji Smart Controller Specifications

General