To Next Page

To Previous Page

DJI Smart Controller User Manual

Smart Controller Warning Sounds

In certain scenarios that require a user warning, the Smart Controller will do so by vibrating and/or

beeping. When the controller beeps and the status LED is solid green, this error may be related to

the aircraft or ight status, and a warning will appear in DJI GO 4. If this error is related to the Smart

Controller, the controller’s screen will display a warning or alert.

To disable the beeping, power on the remote controller, select “Sound” in Settings, and turn off

“Notication volume”.

System Update

Method 1: Wireless Update

Make sure the remote controller is connected to the internet while updating.

1. Power on the remote controller. Tap and then . Scroll to the bottom of the page and tap

“System Update”.

2. Tap “Check for Updates” to check the rmware. A prompt will appear if a rmware update is

available.

3. Follow the prompts to nish the update.

4. The remote controller automatically restarts after the update is nished.

Method 2: DJI Assistant 2

1. Make sure the remote controller is powered off, and then connect the remote controller to a

computer using a USB 3.0 USB-C cable.

2. Power on the remote controller.

3. Launch DJI Assistant 2, and log in using a DJI account.

4. Click the Smart Controller icon, and then “Firmware Update”.

5. Select and conrm the rmware version you want to update.

6. DJI Assistant 2 will download and update the rmware automatically.

7. The remote controller will restart after update.

Make sure the remote controller has more than 50% power before updating.

DO NOT disconnect the USB-C cable during the update.

Make sure the remote controller or the computer is connected to the internet during the

update.

The update takes approximately 15 minutes.

Button Combinations

Some frequently-used features can be activated by using button combinations. To use button

combinations, rst hold the Back button until the controller vibrates. Continue to hold this button

while also holding the other button in the button combination to activate the function.

Questions and Answers:

Need help?

Do you have a question about the dji Smart Controller and is the answer not in the manual?

dji Smart Controller Specifications

General