13
Remote Controller
Remote Controller Profile
The remote controller operates at 2.4 GHz with a maximum signal transmission range of 3 km.
Compliance Version: The remote controller complies with both CE and FCC regulations (refer to FCC ID).
Operating Mode can be set to Mode 1, Mode 2 or a custom mode.
Mode 2: The left stick serves as the throttle.
Mode 1: The right stick serves as the throttle.
To prevent transmission interference, do not operate more than three aircraft in the same area.
Preparing the Remote Controller
Tilt the Mobile Device Holder to the desired position, adjust the antenna, and connect the
mobile device as shown.
1. Press the button on the side of the Mobile Device Holder to release the clamp.
2. Place your mobile device inside the clamp and adjust the clamp to secure your mobile device.
3. Connect your mobile device to the remote controller via a USB cable.
To Next Page
Loading...
Need help?
General
