dji WIND-4

21
Remote Controller Status LED
The Status LED shows the connection status between the remote controller and aircraft while the RTH Status LED
indicates the Return-to-Home Status of the aircraft. The table below shows the Status LED and RTH Status LED on
the remote controller.
Status LED
Alarm
Remote Controller Status
Solid Red
Chime
The remote controller is disconnected from the aircraft.
Solid Green
Chime
The remote controller is connected to the aircraft.
Flashing Red Slowly
D-D-D······
Remote controller error
RTH LED
Alarm
Aircraft Status
Solid White
Chime
The RTH initiates.
Flashing White
D · · ·
The RTH command is sent to the aircraft.
Flashing White
DD ·· ·· ··
The aircraft is returning to the Home Point or descending
automatically.
The Status LED will flash red and sound an alert when the battery level is critically low.