dji ZENMUSE H4-3D - DJI F450 & F550 Installation

10
©
2015 DJI. All Rights Reserved.
ZENMUSE H4-3D User Manual
3. Use the F450 adapter to install the H4-3D onto the DJI F450.
4. Use the F450 adapter and F550 adapter to install H4-3D to DJI F550.
Aircraft, camera, and accessories are not included with the gimbal.
Camera must be aligned to face the nose of the aircraft, and the gimbal should be parallel
with the aircraft itself.
The gimbal is calibrated before delivery. Do not attempt to adjust or calibrate it yourself.
Do not remove any screws in the gimbal, which may result in reduced performance or failure.
Do not unplug any cable attached to the gimbal ports or change the mechanical structure of
the gimbal.
The 8-pin port on the H4-3D should only to be used to connect the gimbal to your aircraft.
Do not connect other devices (such as a 5.8G video downlink transmitter) to this port,
otherwise the gimbal may be damaged.
DJI F450 F450 adapter H4-3D GCU
DJI F550 F450 adapter F550 adapter H4-3D GCU
Installation