To Next PageTo Next Page
Need help?Do you have a question about the DKS 1503 and is the answer not in the manual?
General| Code Length | 4-6 Digits |
|---|---|
| Operating Temperature | -4° to 158° F (-20° to 70° C) |
| Dimensions | 4.5"H x 3"W x 2"D |
| Number of Keys | 12 |
| Relay Output | 1A/30V DC |
| Type | Keypad |
Provides dimensions and mounting methods for surface and flush keypads.
Details power, grounding, and wire requirements for the access control system.
Illustrates circuit board connections for locks, gate operators, and exit buttons.
Explains the function of each terminal on the 1500-010 circuit board.
Shows wiring diagrams for integrating Aiphone intercom stations.
How to set and manage the four-digit master code for programming access.
Configures the duration the relay remains active after a valid code entry.
Instructions for adding and managing four-digit user entry codes.
Procedures for removing existing four-digit user entry codes.
Steps to program and manage five-digit user entry codes.
Procedures for deleting programmed five-digit user entry codes.
How to set up four-digit hold codes that keep the relay activated.
Steps to remove programmed four-digit hold codes.
How to use four-digit codes to activate the relay for a set time.
How to use four-digit hold codes to activate the relay and keep it on.
Method for using five-digit codes to activate the relay for a set duration.
Explains how a switch closure activates the relay for a programmed strike time.
