EasyManua.ls Logo

DLE DLE106CC - Page 16

Default Icon
30 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Mile Hao Xiang Technology Co., Ltd
15
Prepare in advance and avoid collisions. The Power Jetboard has
no brake. If you want to slow down and stop, you must be prepared
in advance.
For your own safety, do not practice the jetboard too far from the
shore. Before you became a experienced surfer, don't surf too far
away.
8Surfing Skill Quick Guide
•In Shallow Water: Put the Jetboard in the water with a depth of
more than 50cm, stand next to the Jetboard, put one knee on the
Jetboard and insert the key to stage 1(standby mode), hold the
handle on the hull and push the key to stage 2 to start the engine.
When the engine starts, give an appropriate acceleration according to
your weight, so the Jetboard is fast enough to carry the surfer, then
surfer can slowly try to standing up.
•In Deep Water: before go to deep water, please practice in shallow
water first. When you fall off in a deep water area or engine
suddenly stopped, don't immediately climb back to the Jetboard.
swimming to the broadside of Jetboard, hold the handle and insert
the start key. After the engine is started and fast enough to sliding,
the surfer shall climb on to the Jetboard asap, this can avoid too
much of water enters into cabin. Note: if the engine couldn't start
after 2-3 times attempts, please DO NOT start it again, or it could be
damage to the starting motor and other parts. At this stage, the
engine may have been flooded by the water, please go to the shore to