弥 勒 浩 翔 科 技 有 限 公 司
Mile Hao Xiang Technology Co., Ltd
without cooling water, so please do not start the engine on the
shore for too long).
7、Precautions of using Jetboard
• Always wear life vest and explore the surfing area before start,
choose the appropriate waters to start. Note: Avoid floating debris
and underwater obstacles.
• Before use, check whether the engine screws are loose and whether
there is leakage in the fuel tank, fuel pipe, and carburetor. Otherwise
it will cause fire and explosion.
•
Check the cooling water pipe before each use, ensure there is no air
leakage, blockage and damage. Otherwise, the engine and exhaust pipe will
be overheated and damaged.
• The engine must be started in a dry and well-ventilated place, and
it is strictly prohibited to start the engine indoor or a place with bad
ventilation.
• Long time running at idle speed may cause serious carbon build-up
on the spark plug. Never touch the running engine, there is risk of
pinching hand
• Before cooling down, Do not touch the cylinder and exhaust pipe
to avoid burns.
• If water got into the engine or engine sounds oddly, please do not
start the engine more than 3 times to avoid damages the engine.
Please check and eliminate the problem before starting again.
• Maintain a safe speed and keep safe distance from surrounding
people, objects, or other surf boats.
To Next Page
Loading...