弥 勒 浩 翔 科 技 有 限 公 司
Mile Hao Xiang Technology Co., Ltd
immediately, check for possible debris on the thruster, and check the
integrity of the impeller and whether the screws are loose.
Note:
The normal height of cooling water ejection is 50 cm. If the
ejecting height is too low and the temperature is too high, STOP
the engine immediately and check whether the cooling water
pipe is fell off or blocked. Otherwise, the overheat will cause
permanent damage to the engine and exhaust pipe.
5、Throttle handle and key
1. Note that the key is a 2-stages switch, press the key to the stage 1
to prepare for surfing, and the engine can only be started after the
key is pressed to stage.
2. After the key is pressed to stage 2, the controller indicator light is
on and the Jetboard is powered on; After the key is removed, the
indicator light and the power of Jetboard will be automatically turn
off after 3 mins.