弥 勒 浩 翔 科 技 有 限 公 司
Mile Hao Xiang Technology Co., Ltd
Handle inspection：The accelerator trigger is stucking, and it doesn't
reset when you release it.
2.1 Examine the throttle handle components
1 ） Hang the handle on the stand
vertically, spray an appropriate
amount of WD-40 to the hole on the
end of trigger, pull and release the
throttle trigger several times.
2 ） Keep the handle in a vertical
position for at least 5 minutes to
allow the oil to lubricate internal
parts well .
2.2 Check the throttle spring on the carburetor
1）Spray an appropriate amount of WD-40 on the throttle cable that
connects to the carburetor, and pull or release the throttle several
times.
To Next Page
Loading...