DLS CCi2 User Manual

Specifications
We follow a policy of continuous advancement in development. For this reason all or part of specifications
& designs may be changed without prior notice.
12
CCi2 CCi4 CCi44 / CCi44-40
Number of channels 2 4 4
Amplifier class AB AB AB
Power output RMS in 4 ohm 2 x 110 W 4 x 50 W 4 x 85 W
Power output RMS in 2 ohm 2 x 170 W 4 x 70 W 4 x 110 W
Power output RMS 4 ohm bridged 1 x 340 W 2 x 140 W 2 x 220 W
Signal to noise ratio, A-weighted 110 dB 110 dB 110 dB
Damping factor >150 >250 >300
THD @ 5 W, 20Hz-20kHz < 0,25% < 0,25% <0,25%
Frequency response 10 Hz - 50 kHz 10 Hz - 55 kHz 10 Hz - 60 kHz
Input impedance, low level 6 kohm 6 kohm 5 kohm
Input sensitivity 1 - 4V 1 - 4V 1 - 4 V
Input impedance, high level 45 ohm 45 ohm 45 ohm
High level input Yes Yes Yes
Filter high-pass adjustable 50 - 500 Hz* 50 - 500 Hz* 50 - 500 Hz*
Filter low pass adjustable 50 - 500 Hz* 50 - 500 Hz * 50 - 500 Hz*
* can be switched in/out
Bass EQ @ 60 Hz 0 - +6 dB - -
Power consumption, idle 0,5 A 0,5 A 0,7 A
Power consumption, max 43A 40A 64 A
Fuse (no internal fuses used) use external fuse 40 A use external fuse 40 A use external fuse 60 A
Extra - - Internal cooling fan
Dimensions HxWxD(mm) 51 x 129 x 260 51 x 129 x 260 55 x 129 x 320
Dimensions (inch) 2 x 5,1 x 10,2 2 x 5,1 x 10,2 2,2 x 5,1 x 12,6
Weight 1,87 kg 1,8 kg 2,4 kg
All output power ratings
are RMS Watts @ 14,4
VDC, CEA standard
CCi500 / CCi500-40
Number of channels 1
Amplifier class D
Power output RMS, 1 ohm 500 W
Power output RMS, 2 ohm 400 W
Power output RMS, 4 ohm 250 W
Signal to noise ratio, A-weighted 97 dB
Damping factor 140
Frequency response 10 Hz - 500 Hz
Input impedance, low level 22 kohm
Input sensitivity 1 - 4V
Input impedance, high level 45 ohm
High level input with auto start Yes
Filter low pass variable 35 - 250Hz /12 & 24 dB slope
Bass boost @ 60 Hz 0 - +6 dB
Subsonic filter 30 Hz ON / OFF
Phase switch 0 / 180
o
Remote sub level control Yes, with 5 meters cable
Power consumption, idle 0,6 A
Power consumption, max 80A
Fuse (no internal fused used) Use external fuse 60 A
Dimensions HxWxD(mm / inch) 51 x 129 x 320 / 2 x 5,1 x 12,6
Extra Internal cooling fan
Power terminal size 2 AWG / 33 mm
2
Speaker terminal size 7 AWG / 10 mm
2
Weight 2,4 kg

DLS CCi2 Specifications