DMG Encoder based Counting System
Lift speed and Deceleration distance
Annexs
Annex 1 - Multiplex Parameters Setting
Annex 2 - Test and measures
Annex 3 - Instructions for Software update
Annex 4 - VVVF Frenic Lift Setting
Annex 5 - Rollback control and ride comfort
Annex 6 - Unbalancing Rescue Operation's
Annex 7 - Control Panel
Annex 8 - UCM Circuit
Annex 9 - Installation Type
Annex 10 - Shaft Protection
Annex 11 - Fire operation programming procedure
Annex 12 - Timing Diagrams
Download
You can download the PDF quick start guide at the following link:
Quick Start Guide
To read the complete guide, keep scrolling the page.
Safety and usage cautions
Before installing our products, we recommend you to consult the section about safety and usage cautions at the link below.
INSTALLATION
The control panel must be installed indoors with a pollution degree of no more than 2.
The enclosure of the control panel has an IP2X degree of protection.
To Next Page
Loading...