- 9 -
Remote
1. Slide out the battery holder from the remote control case. (Push tab "A"
towards the middle first, see diagram).
2. Place one 3V CR2025 battery into the battery holder, observing the polar
marking. If the battery is placed incorrectly, the remote control will not work.
Dispose of the old battery properly. Do not leave it lying around where a you
child or pet could play with or swallow it.
3. Battery may explode or leak if it is mistreated. Do not attempt to recharge it o
disassemble it. Do not dispose of the old battery in a fire.
4. Insert the battery holder into the battery compartment.
Note: Please remove all the batteries to prevent damage or injury from possi
battery leakage if the unit will not be used for a long period of time. Use only the
specified size and type of battery.
Using the Remote control to operate the product
Aim the remote control directly at the remote control sensor (IR) on the front
panel. Don’t put any objects between the remote control and the system while
operating the unit.
To Next Page
Loading...
