DMTech FP9000L-2 - Warranty; Conditions for Use, Storage and Transport

Instructions for installation, setup and operation - FP9000L-2/4/6/8
Page 15 of 16
 LED indication - light up indicators:
- "TEST" is lit with yellow light
- " 1 2 3 4 5 6 7 8 " local line indicator in Test lights up with flashing yellow and red light.
 Beeper indication - is not affected by the of the Test condition lines.
8.5.1. TEST LED
Testing of LED indication the panel done by button «T».
9. CONDITIONS FOR USE, STORAGE AND TRANSPORT
 Operation and storage
The panel is used and stored in closed rooms under the following conditions :
 Temperature
- storage from 5
о
C to 35
о
C
- transport from -10
о
C to 50
о
C
- working from -5
о
C to 40
о
C
 Relative humidity
- storage to 80%
- working to 93%
 Transport
The panel is transported in covered vehicles, in factory packing and in the above atmospheric
conditions.
10. DELIVEERY COMPOSITION AND COMPLEXITY/SET
 Fire Station FP 9000L
1 qty.
 EOL - resistor 4,7k/0,5W:
- for configuration with 2 lines /FP9000-2/
2 qty.
- for configuration with 4 lines /FP9000-4/
4 qty.
- for configuration with 6 lines /FP9000-6/
6 qty.
- for configuration with 8 lines /FP9000-8/
8 qty.
 (EOL) End for controllable output - resistor 4,7k/0,5W;
2 qty.
 Fuse 4,0А;
2 qty.
 Connective bridge for batteries;
1 qty.
 Packaging.
1 qty.
11. WARRANTY
The manufacturer guarantees the product’s conformity with EN 54-2: 1997, A1: 2006, EN54-4:
1997, A1: 2002, A2: 2006. The warranty period is 24 months from the date of sale, provided that:
- the conditions of storage and transport were met;