setting bar . Please turn off the function.
9. What if the product cannot set the date and time correctly?
Please ensure that the product has enough power to be turned on normally, enter the
system setting bar to find the date and time option, and enter this option to set. After
setting, the date and time setting can only be completed by manually turning off the
dash cam.
10. Why does the product automatically heat up?
A. The product has been used for long time.
B. The temperature in the car is too high.
11.Drove for a couple of days and took the sd card out to view the recordings. Every single
recording has a January date and the wrong time. Fix?
Answer: You can set the date+time through the settings menu. After setting, manually
turn off the dash cam. Time setting is completed.
12. The recorded image is not clear.
A. There is a protective film is attached to prevent damage for both front and rear
camera lenses. Please peel off both films before use.
B. Check if the windshield is clean.
13. I think the sound of the button is very noisy.
Please select “OFF” for the operation voice (OFF / ON) button in the system settings.
※ Warranty
30-day money-back guarantee for any reason
For 30 days after the date of purchase, return your undamaged DMYCO product and
receive a full refund for ANY reason.
12-month warranty for quality-related issues
For 12 months after the date of purchase, we take care of all quality related issues with a
REPLACEMENT OR FULL REFUND.
Friendly reminder: make sure to first read any enclosed user manual and that you have
used the product as instructed. When contacting us for help, be sure to have your DYMCO
product handy for troubleshooting!
Limitations
• Our returns and exchange service is limited to all purchases made from DYMCO. If you p
urchased through a different retailer, please contact them directly.
(Unauthorized reselling of DYMCO products is prohibited.)
-16-
To Next Page
Loading...