DNP CX-D80 - Page 27

Contrast Setting
v
For setting the contrast of the operation panel display.
Settings
v
-3, -2, -1, 0, 1, 2, 3
Selecting a larger value increases the contrast.
1
Press I
v
A [Cleaning] message appears.
.
2
Press J to set to [Setting]
v
Pressing it each time displays the next setting item.
.
3
Press G
v
A [Display] message appears.
.
4
Press G
v
A [Mode] message appears.
.
5
Press J to set to [Contrast]
v
Pressing it each time displays the next setting item.
.
6
Press F
v
Enters the settings change mode.
.
7
Press A and select a setting
8
Press B to confirm the setting
v
Pressing B confirms the setting and returns you to the previous
screen.
9
Press H to exit the setting mode
v
Pressing it each time displays the setting item on the next higher
level.
Operating the Printer
27