www.docash.de
8.2 Error Codes After Calibration
If the following error code is displayed during the course of detecting,
you can handle them as per the error type after the machine is stopped.
8.3 Detective Error Code Display
If the following error code is displayed during the course of detecting,
you can handle them as per the error type after the machine is stopped.
15
C14 The right MG sensor is abnormal
C15 The UV sensor is abnormal
C17 The left IR transmitter is abnormal
Error code Reason
E1 The bottom 850nm IR sensor
E2 The bottom 940nm IR sensor
E3 The right IR transmitter sensor
E4 The bottom IR reflection
E5 The upper IR reflection
E6 The upper 850nm IR sensor
E7 The upper 940nm IR sensor
E8
The left IR transmitter sensor