8
Getting Started
4. Turn on/off Your Camera.
Press [ ] to turn on or turn off the unit.
5. Select Language→Set the Time Zone→Select the Speed Unit of Your Choice
Upon powering up the camera for the first time or after upgrading the firmware on the device, you
will need to go through the Settings below.
Select Language
Select the language of your choice by pressing [] / [].
Press [ ] found on the top of your unit to confirm your selection.
Set the Time Zone
Scroll down and select your respective time zone.
Press [ ].
Your camera will automatically sync with the time and date to the atomic clock once the time
zone is correctly set.
Note: The time zone must be manually adjusted for daylight savings.
Select the Speed Unit of Your Choice
To Next Page
Loading...
