20
Transferring Files
Video files can be transferred to your electronic device for viewing and storage.
USB Cable
1. Connect a USB cable from the camera’s USB port to computer.
2. Turn on your camera. A black screen should appear showing “Mass Storage”.
3. Press the “Record/Select” button. A blue screen should appear labeled “Mass Storage”.
4. Your computer should now detect a new device. The memory card and videos can be accessed
similar to a USB flash drive.
Card Reader/Micro SD Slot
Use a memory card reader (separately purchased) or a compatible electronic device with a Micro SD
slot (ex: tablet). Follow the manufacturer’s instructions.
Video Output
HDMI (TV)
Connecting a mini-HDMI to HDMI from your camera to a compatible television/monitor will
automatically output the camera’s screen. Recording functions are disabled while streaming video.
AV Port
Using a 3.5mm AV cable, plug the 3.5mm connector into the camera’s AV port. Plug the RCA end into
a compatible port on your television or monitor.
Firmware Update
See the support section on DOD-Tech’s website for any available firmware updates and instructions.
To Next Page
Loading...
