16
Camera Settings
Video Recording: First Settings Page
Accessed by pressing [ ] once.
Parking mode (Default: off)
When function is enabled, dashboard camera will automatically switch to parking mode if vehicle is stationary for
over 10 minutes.
1. Automatically records a 15-second video when motion detected within view range of camera.
2. Automatically records and locks a 1-minute video when excessive force of impact is detected by G-sensor.
3. Unit will return to normal recording mode if vehicle moves continuously for 3 seconds or longer.
Note:
Parking Mode requires consistent power supply via vehicle battery. (Power cord with low-voltage protection is
recommended to prevent battery drainage.)
Please ensure to enable G-sensor function in setting menu before switch to Parking Mode. (G-sensor sensitivity
Default: Medium)
Parking Mode will automatically shut down GPS locating, and will resume when switched to normal recording
mode.
Plate Stamp
Imprints a customized set of 8 digits to the recorded
video. Add license plates or other identifying features
to watermark your video.
Driver Fatigue Warning
Sets a timed delay before showing a visible alert
reminding the driver to take a break.
GPS Logging
On/Off.
Default: On.
Speed Warning
Shows a visual warning on the Head Up Display when
the set speed has been exceeded.
Set Time Zone
Sets the current time zone for GPS time and date
calibration. Not the time zone must be manually
adjusted for daylight savings
Password Settings
Set a password lock which will prevent files from being
deleted or the settings changed on the device.
Note: This does not prevent other users from
extracting the memory card or changing the files. This
feature should be turned off during regular driving.
Speed Units
Select Metric or Imperial units.
Image Rotation
Rotates the recorded image 180
o
. Used if the camera is
mounted on the dashboard.
To Next Page
Loading...
