15
Getting Started
2. Connect the Power Adapter.
Plug the DOD power adapter into your vehicle’s power outlet.
Insert the USB plug into the USB port.
3. Turn on Your Vehicle.
Power from your vehicle through the outlet will automatically turn on your camera and when
power is turned off your camera will shut off automatically. The camera automatically begins
recording every time it is turned on and stops recording when it is turned off.
Note: In specified cars, the power may be constantly supplied to the device even the
engine is turned off. This may run out the vehicle battery. The optional DOD DP4 kit
equipped with low-voltage protection design to prevent battery drainage.
To Next Page
Loading...
