19
Basic Camera Operation
Everyday Operation
Your dash camera will automatically turn on and start recording when it starts receiving
power. By default, the camera will record over the oldest videos when the memory card is
full (loop recording).
Continuously Powered Electrical Outlet
If your camera is continuously powered, the camera will not automatically shut down when
your vehicle is turned off. To turn off your camera, the USB cable can be pulled out or the
power button can be pressed (see the below section).
The camera may be left on while parked to capture video while you are away.
“Continuously-Powered-Electrical-Outlet” operation will slowly drain your vehicle’s battery
and may eventually prevent your car from starting.
Manually Turning On/Off Your Camera
Press【 】to turn on/off your camera.
Press【 】to begin/stop recording.
Video Directory:
Videos will be saved in the memory card and or in internal storage, normal videos are in the
root directory and the protected files will be saved in the “RO” (Read Only) file.
File-naming format: 2016_0725_180946_002
Year/month/day, time, sequence of the video recorded at the same day.
To Next Page
Loading...
