DOD MEATBOX - Using the Meatbox and Technical Specifications; Effect Placement Recommendations; Typical Effects Chain Order; Input;Output and Bypass Specifications

USING MEATBOX:
Most bassists will favor placing the Meatbox at the beginning of
their chain of eects, so start with that placement. Guitarists may
nd it better to add after distortion eects or near the end of the
eect chain.
A typical eects signal chain will consist of Distortion eects rst
then Modulation eects (Chorus, Flanger, Phaser, Tremolo, etc...)
next and then nally Time based eects (Delay and Reverb).
This being said you may wish to experiment with dierent eect
placements.
SPECIFICATIONS:
Input 1/4” TS Unbalanced - 470 kΩ
Output 1/4” TRS Unbalanced - 100 Ω
Current Draw 20 mA
Bypass True Bypass
Power 9VDC alkaline battery (not included)
HARMAN PS0913DC power adapter (optional)
Warranty 1 Year
DOD
10653 River Front Parkway
South Jordan, UT 84095
USA
801-566-8800
Rev A - 6/15