Vehicles Not Equipped With Keyless Enter-N-Go
1. Turn the ignition switch to the ON/RUN position (do not start the engine).
2. Fully depress the accelerator pedal, slowly, three times within 10 seconds.
3. Turn the ignition switch to the OFF/LOCK position.
Using The EVIC Menu
Vehicles Equipped With Passive Entry
• W ithout pressing the brake pedal, push the ENGINE ST ART/STOP button and cycle the
ignition to the ON/RUN position (Do not start the engine.)
• Push and release the DOWN
arrow button to scroll downward through the main
menu to “V ehicle Info.”
• Push and release the RIGHT
arrow button to access the ”Oil Life” screen.
• Push and hold the RIGHT
arrow button for one second to access the ”Oil Life Reset”
screen.
• Push and hold the DOWN
arrow button until the screen shows 100% oil life.
• Push and release the UP arrow button to exit the EVIC screen.
Vehicles Not Equipped With Passive Entry
• W ithout pressing the brake pedal, cycle the ignition to the ON/RUN position (Do not
start the engine.)
• Push and release the DOWN
arrow button to scroll downward through the main
menu to “V ehicle Info.”
• Push and release the RIGHT
arrow button to access the ”Oil Life” screen.
• Push and hold the RIGHT
arrow button for one second to access the ”Oil Life Reset”
screen.
• Push and hold the DOWN
arrow button until the screen shows 100% oil life.
• Push and release the UP arrow button to exit the EVIC screen.
NOTE:
If the indicator message illuminates when you start the vehicle, the oil change indica-
tor system did not reset. If necessary, repeat this procedure.
WHAT TO DO IN EMERGENCIES
113
To Next Page
Loading...
Need help?
General
